ATI D16 PortaSens III Portable Gas Detector
Features
- Interchangeable "Smart Sensors" for over 30 gases
- Internal 4 GB data logger with USB output
- Easy to read LCD with back-lit color graphics
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The ATI D16 PortaSens III is the ideal device for locating leak sources or simply for measuring gas concentrations in the workplace. With a built-in sampling pump and inlet wand, samples are drawn from precise locations where leaks may occur. Areas around valve packing, flanges, compression fittings and other system components are easily checked to find the higher gas levels that exist near the leak site.
Modern Interface
The internals of the instrument are designed with a modern USB computer interface, a color touch-screen display, and improved pump control. The D16 detector has the ability to measure a wide variety of gases by simply inserting the appropriate sensor for that gas. The device can use any of over 60 different sensor modules, providing nearly unmatched flexibility. Sensors can be changed quickly and easily without the need for calibration.
Smart Sensor Modules
Sensors used in the PortaSens III are ATI’s H-Series smart sensor modules. Each sensor module is actually a sensor, amplifier, and memory module in one compact package. Because of this design, sensor modules can be calibrated independently and simply plugged into any detector for immediate use.
No Adjustments Necessary
When installed in a detector, calibration data is loaded into the microprocessor so that no adjustments are needed. The result is that a detector can, for example, go from phosgene measurement to ammonia measurement in less than one minute.
- Range: Dependent on sensor module used
- Display: Back-lit touch-sensitive color graphics LCD
- Accuracy: Sensor dependent, but generally +/-5% of value (limited by cal. gas)
- Sensitivity: Typically 0.1-1% of sensor module range
- Output: USB transfer of stored gas values
- Memory: 4 GB (millions of data points)
- Storage Interval: Programmable from 1 minute to 60 minutes
- Alarms: Three concentration alarms (caution, warning, and alarm with adjustable setpoints); Low flow and low battery alarms; Alarms displayed on LCD & Indicated by audible beeper
- Power: Rechargeable NiMH D cell battery runs about 10 hours continuously. Two D cells supplied with unit. Alkaline D cell battery may also be used.
- Charger: Optional charger available
- Operating Temperature: -25 to +55 degrees C
- Humidity: 0-95% Non-condensing
- Detector Material: Glass Filled Polycarbonate
- Size: 3.5" (W) x 9" (H) x 5.5" (D) (89mm x 229mm x 140mm)
- Shipping Weight: 7 lbs. (3.2 Kg.)
- (1) PortaSens III Gas Detector
- (1) 10" Teflon Lined Sampling Wand
- (1) Carrying Case with Foam Insert
- (1) USB Cable
- (1) NiMH battery charger
- (1) Spare NiMH D-Cell Battery
- (1) Calibration T Fitting
- (10) Spare Filters
- (1) Flowmeter
- (1) Sensor Keeper
Select Options
In The News
Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University
Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.
Read More
Combating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read More
Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring
The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent. Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips. The logger accurately records temperature and turbidity up to a depth of 50 meters.
Read More
