Extech Heavy Duty Hot Wire CFM Thermo-Anemometer
The Extech Heavy Duty Hot Wire Anemometer accurately measures air flow (CFM/CMM) or air velocity plus F/C temperature simultaneously.
Features
- Air velocity measurements as low as 40ft/min
- Telescoping probe extends up to 3ft (940mm) long
- Air flow displayed in 2 modes
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
The Extech Heavy Duty Hot Wire Anemometer accurately measures air flow (CFM/CMM) or air velocity plus F/C temperature. It measures air velocity as low as 40ft/min and air flow in 2 modes, as an instantaneous value, or up to 20 point average. The meter has a telescoping probe that extends up to 3 feet, making it ideal for use in ducts and ventilating systems. Readings are read clearly on the large LCD display. The built-in RS232 interface makes for easy communication using the optional Data Acquisition Software and cable.
- ft/min range: 40 to 3346ft/min
- ft/min resolution: 1ft/min
- ft/min accuracy: +/-(5% + 5 digits)
- MPH range: 0.5 to 38.0MPH
- MPH resolution: 0.1MPH
- knots range: 0.4 to 33.0knots
- knots resolution: 0.1 knots
- m/s range: 0.2 to 17.0m/s
- m/s resolution: 0.1 m/s
- km/h range: 0.7 to 61.2km/h
- km/h resolution: 0.1km/h
- Temperature: 32 to 122F (0 to 50C); 0.1F (0.1 C); +/-1.5F (+/-0.8C)
- CMM meter3/min range: 0 to 36,000m3/min
- CMM meter3/min resolution: 0.001 to 1m3/min
- CMM meter3/min accuracy: 0.001 to 30.0 m2
- CFM feet3/min range: 0 to 1,271,200ft3/min
- CFM feet3/min resolution: 0.01 to 100ft3/min
- CFM feet3/min accuracy: 0.001 to 322.91 ft2
- (1) Anemometer
- (1) Telescoping probe with 5.5ft (167.6cm) cable
- (4) AA batteries
In The News
Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University
Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. 
 
Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.
Read MoreCombating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. 
 
Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. 
 
Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read MoreSeametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring
The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent. 
 
 Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips. 
 
 The logger accurately records temperature and turbidity up to a depth of 50 meters.
Read More