Extech Temperature PID Controller
The Extech Temperature PID Controller offers Fuzzy Logic PID, auto tuning, and soft start features for the ultimate control.
Features
- Dual 4-digit LED displays for process and setpoint values
- One-touch auto tuning for quick setup and stable, precise control
- Accepts thermocouple and RTD inputs
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
The Extech Temperature PID Controller uses Fuzzy Logid PID and soft-start features to protect heaters from cold starts. The PID plus Fuzzy Logic tackles the most demanding applications, eliminating over-shoot, unwanted process fluctuations, and drift. The soft-start feature is ideally suited for processes such as in the Thermo-Plastics industry, where careful and exact slow heating of products is required.
The dual 4-digit LED displays for processes and setpoint values. Programming and navigation are made easy with the user-friendly menus and tactile keypad. The manual mode allows users to override automatic control and drive the controller output higher or lower. The one-touch auto tuning is available for quick set-up and stable, precise control. Two latching alarm relays standard with 8 alarm modes plus advanced timer modes.
The single stage ramp and soak program with ramp-to-setpoint limit can be combined with the soft start feature for critical process demands. The controller accepts thermocouple and RTD inputs. The temperature display is °F or °C selectable, the thermocouple input has 9 selectable types, and the RTD input has 2 selectable types from the display menu without the need for hardware modification.
- Type K input temperature range: -58 to 2498°F (-50 to 1370°C)
- Type J input temperature range: -58 to 1832°F (-50 to 1000°C)
- Type B input temperature range: 32 to 3272°F ( 0 to 1800°C)
- Type T input temperature range: -454 to 752°F (-270 to 400°C)
- Type E input temperature range: -58 to 1382°F (-50 to 750°C)
- Type R or S input temperature range: 32 to 3182°F ( 0 to 1750°C)
- Type N temperature input range: -58 to 2372°F (-50 to 1300°C)
- Type C temperature input range: -58 to 3272°F (-50 to 1800°C)
- PT100Ω RTD (DIN) temperature input range: -328 to 1652°F (-200 to 850°C)
- PT100Ω RTD (JIS) temperature input range: -328 to 1202°F (-200 to 650°C)
- Control/alarm relay: 5 Amp @ 110V, SPST (resistive load)
- DC current output: 4-20mA (resistive); impedance < 600 ohms
- Accuracy: thermocouple: ±1.8°F (1ºC); RTD: ±0.36°F (0.2ºC)
- Sampling time: four samples per second
- LED display: two 4-digit displays for process value, setpoint, and programming modes
- LED status: alarm and control output status
- Control modes: fuzzy logic enhanced three-term PID with auto tune
- Proportional bandwidth: 0 to 300.0%
- Integral time: 0 to 3600 seconds
- Derivative time: 0 to 900 seconds
- Hysterisis: 0.0 to 200.0 or 0.0 to 2000
- Cycle time: 1 to 100 seconds
- Front panel: lexan construction, drip/dust proof; IR rating: IEC IP63
- Power supply: 90 to 264 VAC; 50/60 Hz (< 5VA power consumption)
- (1) PID Controller
- (1) Mounting bracket
Select Options
In The News
Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University
Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.
Read More
Combating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read More
Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring
The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent. Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips. The logger accurately records temperature and turbidity up to a depth of 50 meters.
Read More
