Extech SDL150 Dissolved Oxygen Meter
Features
- Stores 99 readings manually and 20M readings via 2G SD card
- User programmable sampling rate: 1 second to 8hrs:59min:59sec
- Automatic temperature compensation
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
The Extech Dissolved Oxygen Meter/Datalogger features a dual backlit display of oxygen concentration and temperature. The meter measures dissolved oxygen from 0 to 20.0mg/L and 0 to 100.0% oxygen plus temperature from 32 to 122°F (0 to 50°C). The automatic temperature compensation is from 0 to 50°C via the temperature probe sensor built into polarographic type oxygen probe.
An offset adjustment is used for zero function to make relative measurements. The datalogger stores 99 readings manually and 20M readings via the 2G SD card. User programmable sampling rates are from 1 second to 8hrs:59min:59sec. The built-in PC interface lets users easily transfer data points to a PC for further analysis. Additional meter functions include min/max, data hold, automatic power off, and disable.
- Dissolved oxygen range: 0 to 20.0 mg/L
- Dissolved oxygen accuracy: ±0.4 mg/L
- Probe compensation and adjustment: salt: 0 to 50%
- Oxygen range: 0 to 100.0%
- Oxygen accuracy: ±0.7%
- Probe compensation and adjustment: altitude: 0 to 8910m
- Temperature range: 32 to 122°F (0 to 50°C)
- Temperature accuracy: ±0.8°C/1.5°F
- Probe compensation and adjustment: 0 to 50°C
- Meter dimensions: 7.2 x 2.9 x 1.9" (182 x 73 x 47.5mm)
- Meter weight: 25.6oz(725g)
- Probe dimensions: 28mm(1.1")D x 190mm(7.5")L
- (1) Datalogger
- (1) Probe with 4m cable
- (6) AA batteries
- (1) SD card
- (2) Spare replacement membranes
- (1) Electrolyte
- (1) Hard carrying case
Select Options
In The News
Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University
Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.
Read More
Combating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read More
Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring
The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent. Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips. The logger accurately records temperature and turbidity up to a depth of 50 meters.
Read More
