Geotech ORS Interface Probes

This probe accurately measures depth to hydrocarbon layers and water in monitoring wells and tanks.

Features

  • Measurements to depth of fluid are accurate to within 1/100'
  • Rugged, durable, lightweight construction
  • Factory Mutual Approved & intrinsically safe for use in Class 1, Division 1, Group D hazardous sites
Starting At $1,990.00
Stock Drop Ships From Manufacturer  
The ORS Interface Probe is a handheld, battery powered device for measuring depth to water or oil in tanks or wells. The ORS Interface Probe can be used in numerous applications including measuring oil and water levels in monitoring wells, and obtaining accurate measurements of water levels in cascading wells.

This rugged and durable probe is accurate to 1/100' and can detect hydrocarbon layers as thin as 1/200'. Constructed of NEMA 3 weather resistant aluminum, it can fit into wells as small as 0.75" in diameter. The ORS interface probe is intrinsically safe and Factory Mutual Approved for use in Class 1, Division 1, and Group D hazardous locations. Includes tape cleaner attachment for preventing dirt and hydrocarbons from entering the reel assembly, probe, and measuring tape.
  • (1) ORS interface probe
  • (1) ABS carrying case
  • (1) Operations manual
Questions & Answers
Can the probe be damaged by inorganic compounds in the water?
The standard probe is unaffected by most inorganic reagents. See the manual for a chemical resistance chart. If the resistance is poor, it is recommended to use the ORS Chemical Interface probe.
What size is the probe? How small of a well can I use it in?
The standard and chemically-resistant probes are 1" (25.4 mm) diameter cylinders that can be used in wells as small as 1-1/8" (29mm) in diameter. The small probe is 5/8" (0.625 mm) in diameter and can be used in wells with a 1" (25.4 mm) opening.
Does the probe issue a visual or audio alert when it senses liquid?
Both. An oscillating alarm indicates water and a continuous alarm indicates hydrocarbon.
How often should I clean my probe?
After every measurement, the probe should be washed in Alconox detergent, rinsed in distilled water, washed again in Alconox and rinsed for a final time in distilled water, Also clean all accessible parts of the reel assembly. Under some circumstances...
How do I install the new prism assembly?
Ensure the probe is dry and remove the old prism. Keep the probe pointed downward, and thread the new prism into place, securing it finger tight. Then use a 3/4" wrench to firmly seat the o-ring. Be careful not to over tighten.
Why does my probe keep turning off?
The ORS interface probe includes a self shut-off circuit. If the probe has not sensed liquid within 4 minutes of powering on, it will automatically switch to a low power mode. Turn the probe OFF then ON again to restore full power.
Please, mind that only logged in users can submit questions

Select Options

  Products 0 Item Selected
Image
Part #
Description
Price
Stock
Quantity
Geotech ORS Interface Probes
86050001
ORS small oil/water interface meter with 5/8" probe & imperial increments, 100'
Your Price $1,990.00
Drop Ships From Manufacturer  
ORS Small Metric Interface Probes
86050004
ORS small oil/water interface meter with 5/8" probe & metric increments, 30m'
$1,990.00
Drop Ships From Manufacturer  
Geotech ORS Interface Probes
1068013
ORS standard oil/water interface meter with 1" probe & imperial increments, 100'
$2,075.00
Drop Ships From Manufacturer  
ORS Standard Metric Interface Probes
1068017
ORS standard oil/water interface meter with 1" probe & metric increments, 30m'
$2,075.00
Drop Ships From Manufacturer  
Geotech ORS Interface Probes
1068016
ORS chemical oil/water interface meter with 1" probe & imperial increments, 100'
$2,650.00
Drop Ships From Manufacturer  
  Accessories 0 Item Selected
Notice: At least 1 product is not available to purchase online
×
Multiple Products

have been added to your cart

There are items in your cart.

Cart Subtotal: $xxx.xx

Go to Checkout

In The News

Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University

Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.

Read More

Combating Water Insecurity in Saskatchewan with Real-Time Data

The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.

Read More

Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring

The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent.  Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips.  The logger accurately records temperature and turbidity up to a depth of 50 meters.

Read More