Lufft WS302 Multi-Parameter Weather Sensor
Features
- Integrated pyranometer for solar radiation measurements
- Easily mounts to 2" diameter pipe with integrated bracket mount & U-bolts
- SDI-12 output for integration with NexSens and other data loggers
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Lufft family of multi-parameter weather sensors offer a cost-effective, compact alternative for the acquisition of a variety of measurement parameters on land- and buoy-based weather stations. Depending on the model, each sensor will measure a different combination of weather parameters to meet a wide variety of applications. The Lufft WS302 Multi-Parameter Weather Sensor simultaneously measures air temperature, humidity, pressure and solar radiation in a compact platform with ventilated housing.
Air Temperature & Humidity
Temperature is measured using a highly accurate NTC-resistor, while humidity is measured using a capacitive humidity sensor. Both sensors are located in a ventilated radiation shield to reduce the effects of solar radiation.
Pressure
Absolute air pressure is measured using a built-in MEMS sensor. The relative air pressure referenced to sea level is calculated using the barometric formula with the aid of the local altitude, which is user-configurable on the equipment.
Solar Radiation
The pyranometer is intended for shortwave global solar radiation measurements in the spectral range from 300 to 1100nm. The thermopile sensor construction measures the solar energy that is received from the total solar spectrum and the whole hemisphere. The output is expressed in Watts per square meter.
- Air Temperature
- Principle: NTC
- Measuring Range: -50 to +60 C
- Resolution: 0.1 C (-20 to +50 C); otherwise 0.2 C
- Accuracy: +/-0.2 C (-20 to +50 C); otherwise +/-0.5 C
- Units: C; F
- Humidity
- Principle: Capacitive
- Measuring Range: 0 to 100% RH
- Resolution: 0.1% RH
- Accuracy: +/-2% RH
- Units: % RH; g/m3; g/kg
- Pressure
- Principle: Capacitive
- Measuring Range: 300 to 1200hPa
- Resolution: 0.1hPa
- Accuracy: +/-1.5hPa
- Unit: hPa
- Radiation
- Response Time (95%): <1s
- Spectral Range: 300 to 1100 nm
- Measuring Range: 1400 W/m2
- Technical Data
- Interface: SDI-12, Modbus
- Operating Temperature: -50 to +60 C
- Operating Humidity: 0 to 100% RH
- Included Cable Length: 10m
- (1) WS302 Multi-Parameter Weather Sensor
- (1) 10m sensor cable
- (1) Operations manual
Select Options
In The News
Lufft WS-Series Weather Stations: A history of weather monitoring translates to high quality weather sensing options
Gotthilf Lufft started building mechanical weather sensors in 1881. “They really began by measuring temperature and humidity in the most basic sense,” said Ann Pattison, Lufft USA product manager. More than 130 years later, the company is still building weather monitoring technology. For their most recent rendition of weather stations, Lufft engineers traded mechanical dials and horse hair for ultrasonic transducers and pyrometers to create a line of electronic all-in-one weather stations called the WS-Series. The systems have a modular formula that can be tailored to customer’s applications. In fact, many of the ready-made combinations Lufft offers, like a weather station with built-in tipping bucket rain gauge, were inspired by customers.
Read More
Delaware Environmental Observing System detects rare tornado in state
A University of Delaware monitoring network picked up a tornado that touched down in Newark on June 10, according to a release. Tornadoes are rare in the state, but sensors were there to capture it. The Delaware Environmental Observing System, which supplies data to the National Weather Service, charted the tornado with winds of 65 to 85 mph. The observing system also measured the heavy rain that accompanied the tornado. Experts say a low-pressure system and cold front in the Ohio Valley met with warm air in Delaware, which set off the churning clouds that ultimately generated the tornado. The tornado was picked up by a weather station nearly a half mile away, which measured wind speeds at 20 mph.
Read More
USGS weather station network monitors Arctic Alaska's climate
When the U.S. Geological Survey began building their climate and permafrost monitoring network in Arctic Alaska in 1998, there wasn't much precedent for how to build the infrastructure for the instruments in the region's unforgiving environment. That meant the scientists had to learn the particulars on the fly. For example: On the great expanse of flat, barren tundra, a weather station sticks out like a sore thumb to a curious grizzly bear. "The initial stations were pretty fragile," said Frank Urban, a geologist with the USGS Geosciences and Environmental Change Science Center. "So the bear and those stations--the bear won every single time without any problem.
Read More
