Onset HOBO MX Temperature Data Logger
Features
- Set up and offload loggers wirelessly from your mobile device or Windows computer
- Splash-proof design enables use in damp environments and spray-down applications
- Visual alarms on the logger display and mobile app keep you notified of problems
- Expedited repair and warranty service
- Lifetime technical support
- More
Onset's HOBO MX100 is a low-cost, splash-proof, Bluetooth-enabled data logger that measures and transmits temperature data wirelessly to mobile devices or Windows computers.
Ideal for a range of indoor monitoring applications, this self-contained wireless data logger lets you configure it and access temperature data at any time when within a 100-foot range, with no dedicated equipment beyond a mobile device or Windows computer running the HOBOconnect app.
Onset's free HOBOconnect app makes it fast and easy to view temperature graphs, check the operational status of MX100 loggers, configure alarm notifications, and share data files.
The HOBO MX100 data logger requires a compatible mobile device or Windows computer running the HOBOconnect app.
Temperature Sensor |
|
Range |
-30° to 70°C (-22° to 158°F) |
Accuracy |
±1.0°C from -30° to -5°C (±1.8°F from -22° to 23°F) |
Resolution |
0.04°C (0.072°F) |
Drift |
<0.01°C (0.018°F) per year |
Response Time |
6 minutes typical to 90% in open air moving 1 m/s, unmounted |
Logger |
|
Logger Operating Range |
-30° to 70°C (-22° to 158°F) |
Radio Power |
1 mW (0 dBm) |
Transmission Range |
Approximately 30.5 m (100 ft) line-of-sight |
Wireless Data Standard |
Bluetooth Smart (Bluetooth Low Energy) |
Logging Rate |
1 second to 18 hours |
Time Accuracy |
± 1 minute per month at 25°C (77°F) |
Battery |
CR2450 3V lithium, not replaceable |
Battery Life |
1 year, typical with logging interval of 1 minute and Power Saving Mode disabled; 2 years, typical with logging interval of 1 minute and Power Saving Mode enabled. Faster logging intervals, remaining connected with the app, excessive downloads, and paging may impact battery life. |
Memory |
30,000 Measurements |
Full Memory Download Time |
Approximately 30 seconds; may take longer the farther the device is from the logger |
Dimensions |
6.9 x 4.5 x 1.1 cm (2.71 x 1.76 x 0.42 inches) |
Weight |
25.5 g (0.90 oz) |
Environmental Rating |
IP67 |
In The News
Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University
Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. 
 
Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.
Read MoreCombating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. 
 
Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. 
 
Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read MoreSeametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring
The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent. 
 
 Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips. 
 
 The logger accurately records temperature and turbidity up to a depth of 50 meters.
Read More