Onset HOBO UX90 State Data Logger

The Onset HOBO state/pulse/event/runtime logger records state changes, electronic pulses, and mechanical or electrical contact closures from external sensing devices.

Features

  • One logger with four recording modes
  • Internal reed switch can be used to determine when a door or window is open or closed
  • Compatible with a wide range of external sensors
Starting At $110.00
Stock Check Availability  

Overview
Records state changes, electronic pulses, and mechanical or electrical contact closures from external sensing devices. Ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The Onset HOBO UX90 state logger is compatible with a wide range of external sensors, and operates in an indoor environment. 

Memory
The HOBO UX90-001 State Data Logger is available in a standard 128 KB memory model (UX90-001) capable of 84,650 measurements and an expanded 512KB memory model (UX90-001M) capable of over 346,795 measurements.

Measurements Supported

  • Event
  • Kilowatt Hours (kWh)
  • Motor On/Off
  • Pulse Input
  • Runtime
  • State Open/Closed
  • Water Flow
Internal Sensor
Maximum State, Event, Runtime Frequency

1 Hz

Preferred Switch State

No magnet present (normally open)

External Input
External Contact Input

Electronic solid state switch closure or logic driven voltage output

Range

0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered)

Maximum Pulse Frequency

50 Hz

Maximum State, Event, Runtime Frequency

1 Hz

Pulse, Event Lockout Time

0 to 1 second in 100 ms steps

Solid State Switch Closure

Input Low: < 10 KΩ; Input High: > 500 KΩ

Internal Weak Pull-Up

100 KΩ

Input Impedance

Solid state switch closure: 100 KΩ pull up

Logger
Resolution

Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event

Logging Rate

1 second to 18 hours, 12 minutes, 15 seconds

Memory Modes

Wrap when full or stop when full

Start Modes

Immediate, push button, date & time, or next interval

Stop Modes

When memory full, push button, or date & time

Power Source

One 3V CR2032 lithium battery and USB cable

Battery Life

1 year, typical with logging intervals greater than 1 minute and normally open contacts

Memory

UX90-001: 128 KB (84,650 measurements, maximum)

UX90-001M: 512 KB (346,795 measurements, maximum)

Download Type

USB 2.0 interface

Full Memory Download Time

10 seconds for 128 KB; 30 seconds for 512 KB

Logger Operating Range

Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)

Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification

LCD

LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range

Size
3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.)
Weight
23 g (0.81 oz)
Environmental Rating

IP50

  • HOBO UX90-001x State Data Logger
  • 2.5 mm input cable
  • Command strip
  • Double-sided tape
  • Hook & loop strap
  • Magnet with 2 screws
Questions & Answers
No Questions
Please, mind that only logged in users can submit questions

Select Options

  Products 0 Item Selected
Image
Part #
Description
Price
Stock
Quantity
Onset HOBO UX90 State Data Logger
UX90-001
HOBO UX90 state/pulse/event/runtime time-of-use logger (128K)
Your Price $110.00
Check Availability  
Onset HOBO UX90 State Data Logger
UX90-001M
HOBO UX90 state/pulse/event/runtime time-of-use logger (512K)
$145.00
Check Availability  
  Accessories 0 Item Selected
Notice: At least 1 product is not available to purchase online
×
Multiple Products

have been added to your cart

There are items in your cart.

Cart Subtotal: $xxx.xx

Go to Checkout

In The News

Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University

Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.

Read More

Combating Water Insecurity in Saskatchewan with Real-Time Data

The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.

Read More

Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring

The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent.  Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips.  The logger accurately records temperature and turbidity up to a depth of 50 meters.

Read More