Solinst Levelogger 5 Junior Water Level Loggers
The Solinst Levelogger 5 Junior is a low-cost device that continuously measures water level and temperature in both ground and surface water environments.
Features
- Maintenance-free, water-tight design with direct or optical data upload
- Increased memory of up to 75,000 readings of level and temperature
- Compatible with Levelogger Series Software & accessories
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Solinst Levelogger 5 Junior provides an inexpensive alternative for measuring groundwater and surface water levels and temperature. The Levelogger 5 Junior combines a pressure sensor, temperature detector, a datalogger, and 5-year battery (based on a 1-minute sampling rate) in one compact 22mm x 160mm (7/8" x 6.3") stainless steel housing.
Durable
The Levelogger 5 Junior records absolute pressure using the same durable Hastelloy pressure sensor as the Levelogger 5. The Hastelloy sensor performs well in harsh environments and can withstand 2 times overpressure without permanent damage.
Data Storage
The Levelogger 5 Junior features a memory with a capacity of 75,000 sets of temperature and water level data points. Readings are linear at a user-defined interval between 0.5 seconds to 99 hours. Accuracy is 0.1% FS with lifetime factory calibration. Real Time View option allows immediate viewing of live water level and temperature readings, independent of scheduled programming intervals.
Level Sensor: Piezoresistive Silicon with Hastelloy Sensor
Ranges: 5,10 m
Accuracy: ± 0.1% FS
Resolution: 0.02% FS to 0.01% FS
Units of Measure: cm, m, ft, psi, kPa, bar, (ºC, ºF)
Normalization: Automatic Temp Compensation
Temp Comp. Range: 0ºC to 40ºC
Temperature Sensor: Platinum Resistance Temperature Detector
Accuracy: ± 0.1ºC
Resolution: 0.1ºC
Battery Life: 5 Years (based on 1 reading/minute)
Operating Temperature: - 20ºC to 80ºC
Clock Accuracy (typical): ± 1 minute/year (- 20ºC to 80ºC)
Memory Modes: Continuous or Slate
Maximum Readings: 75,000 sets of readings
Communication: Optical high-speed: 57,600 bps with USB
Size: 22 mm x 160 mm (7/8" x 6.3")
Weight: 166 grams (5.6 oz)
Wetted Materials: 316L Stainless Steel, Delrin®, Viton®, Hastelloy
Sampling Mode: Linear, Real Time View, Future Start
Measurement Rates: 0.5 sec to 99 hours
Barometric Compensation: Data Wizard and Barologger 5
Select Options
In The News
Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University
Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.
Read More
Combating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read More
Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring
The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent. Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips. The logger accurately records temperature and turbidity up to a depth of 50 meters.
Read More
