Solinst Model 101 P7 Probe Water Level Meters
Features
- Probe is submersible to 1000 ft. for measuring total well depth
- Non-stretch PVDF well tape with stainless steel conductors
- Permanent laser markings every 1/100 ft. or each millimeter
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Model 101 P7 Probe Water Level Meters are the industry standard for portable hand-operated meters to measure the depth of water in wells, boreholes, standpipes, and tanks. They are sturdy, easy to use, and read accurately up to 1/100 ft. or each millimeter. The Model 101 P7 Water Level Meter features a pressure-proof probe rated at 500 psi and laser-marked PVDF tape. The P7 Probe is submersible up to 1000 ft. (300 m), ideal for measuring total well depth. The sensor at the tip of the probe provides consistent measurements with almost zero displacements. The tape seal plug design allows the probe to be quickly and easily replaced if required.
Durability
The Model 101 P7 Probe Water Level Meter uses extremely durable PVDF flat tape, traceable to NIST and EU measurement standards. Each tape conductor contains 13 strands of stainless steel, and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency. The well tape has a thick dog bone design that prevents adherence to wet surfaces and allows it to hang straight in application settings. The tape is also easy to splice. The 3/8" (10 mm) well tapes come with permanent laser markings every 1/100 ft. or each millimeter.
- (1) Solinst Model 101 P7 Probe Water Level Meter
- (1) Tape guide/datum
Select Options
In The News
Wetland water level study skips modern sensor tangle for 1930s method
Environmental sensors can measure almost any physical parameter in nature, but sometimes they can overwhelm the science they are supposed to support. Jason Hill, an assistant professor of engineering at the University of Southern Indiana, wants to create a water level model that will help wetland restorers understand and predict water level fluctuations by studying water loss through the ground and evapotranspiration. The problem is his next project site has too many variables to measure. So, he’s taking an old fashioned route based on empiricism and water level measurement. Hill said that conventional techniques for estimating evapotranspiration require site specific micrometeorological data, like solar radiation, wind speed and vapor pressure.
Read More
Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University
Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.
Read More
Combating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read More
