NexSens X2-SDLMC Submersible Data Logger
Features
- Wet-mateable sensor and power ports with integrated wireless communications
- Optimized for use with CB-25 data buoy for monitoring water or atmospheric conditions
- Withstands extreme wave action, floods, and periodic & long-term deployment underwater
- Expedited repair and warranty service
- Lifetime technical support
- More
The X2-SDLMC Submersible Data Logger is a rugged, self-powered remote data logging system specifically designed for offshore use without fear of accidental flooding. The system is configured with two sensor ports for connection to industry-standard digital interfaces including RS-485, RS-232 and SDI-12. Additional sensor inputs are available through the use of port splitters and adapters. All connections are made using MCIL/MCBH wet-mate connectors, and the built-in sensor library automatically facilitates setup and configuration. Sensor data is recorded on common or independent schedules.
Unlike many data loggers, the X2-SDLMC is truly submersible. The housing and battery compartment are completely sealed and waterproof. Internal circuit boards and communication modules are shock mounted, and all access ports incorporate redundant sealing. The X2-SDLMC withstands extreme wave action, floods, periodic & long-term deployment underwater, and more. When fitted for wireless remote communication, the cellular and satellite antennas are also waterproof.
The X2-SDLMC can be powered by internal SLA battery or external 5-16 VDC power. The internal SLA battery is intended for use with the CB-25 data buoy for continuous power via solar charging. Common sensor connections include multi-parameter sondes, water quality sensors, temperature strings, Doppler velocity meters, water level sensors, and weather stations. Optional integrated cellular or satellite telemetry modules offer real-time remote communications via the WQData LIVE web datacenter. There, data is presented on a fully-featured and easy-to-use dashboard. Other features include automated reports, alarms, push notifications and much more.
Material: Housing: PVC; Connectors: Type 316 SS, neoprene; Pressure valve: Anodized aluminum
Weight: 5.0 lbs. without batteries; 8.3 lbs. with SLA battery pack
Dimensions: 5.5” (13.97 cm) diameter; 15.0” height (38.10 cm)
Internal Power: 6 A-Hr SLA battery, 12 VDC
External Power Requirements: 5-16 VDC ±5% (Reverse polarity protected)
Current Draw (Typical @ 12VDC): Low power sleep: 350uA; Active: 45mA; Cellular transmitting: 300mA; Iridium satellite transmitting: 170mA
Peak Current: Power supply must be able to sustain a 500mA 1-second peak current (@ 12V)
Operating Temperature: -20 to 70°C
Rating: 100m depth rating (standalone); 10m depth rating (with telemetry)
User Interface: RS-485 direct to CONNECT Software, WQDatalive Web Datacenter
Data Logging: 256MB microSD card (expandable up to 4GB)
Data Processing: Parameter level polynomial equation adjustment; Basic & burst averaging (min, max, standard deviation, and raw data available)
Real Time Clock (RTC): <30sec/month drift1; Auto-sync weekly2; Internal backup battery
Log Interval: User configurable from 1 minute (10 minute default)3; Unique interval per sensor
Transmission Trigger: Time-based; Selective parameter upload option
Sensor Interfaces: SDI-12, RS-232 (2 channels), RS-485
Sensor Power: (2) independent switches from input supply4,5
Built-in Sensors: Temperature (-40 to 85°C, 0.1°C resolution, ±3°C accuracy); Humidity (0-100%, 0.1% resolution, ±4% accuracy from 5-95% RH & -20 to 70°C); Battery voltage; System & sensor current
Sensor Ports: (2) MCBH-8-MP for sensor interface (RS-232, RS-485, SDI-12, Switched Power, GND)
Power Port: (1) MCBH-6-FS for power and communication (12V Solar In, Power Switch, RS-485 Host, GND)
Telemetry Options: 4G LTE cellular, CAT-M1 cellular, Iridium satellite
Antenna Port: Type N female
1Assumes 25ºC operating temperature
2Requires the X2-SDLMC to be connected to the internet
3Minimum log interval dependent on sensor limitations and processing time
4Cumulative concurrent current limit of all three channels is 2A
5Logger power supply must be able to support current requirements of sensors
Select Options
In The News
Applied Research and Innovative Solutions: Creating CHNGES at Western Kentucky University
Long-standing environmental monitoring programs have the power to support a large number of research initiatives and policy changes—however, actually starting these networks can prove challenging. Not only is starting the program difficult, but keeping things operational for decades to come has also been challenging for environmental professionals hoping to make an impact with applied research. Jason Polk, Professor of Environmental Geoscience and Director of the Center for Human GeoEnvironmental Studies (CHNGES) at Western Kentucky University, is all too familiar with this process.
Read More
Combating Water Insecurity in Saskatchewan with Real-Time Data
The prairies of Saskatchewan can be described as one of the least water-secure parts of Canada, making water quality monitoring essential for informed resource management in a region already facing water insecurity. While natural physical properties worsen some of the poor water quality conditions in the region, others are connected to land use. Having grown up spending summers on the shores of Lake Huron, Helen Baulch, an associate professor at the School of Environment and Sustainability at the University of Saskatchewan , has always been dedicated to the protection of water resources. Looking back fondly at her childhood playing along the shore, Baulch also recalls the invasion of quagga mussels during her teenage years and watching the lake change as a result.
Read More
Seametrics Turbo Turbidity Logger: Boost your Turbidity Monitoring
The Seametrics Turbo Turbidity Logger is a self-cleaning turbidity sensor capable of internally logging over 260,000 data records. The sensor enables researchers, compliance officers, and contractors to monitor turbidity in various applications, from construction and dredging sites to wastewater effluent. Due to its narrow width, this device can be deployed in a range of areas, from small well spaces to rivers and streams. The stainless steel housing and built-in wiper allow the sensor to withstand long-term deployments and reduce the need for maintenance trips. The logger accurately records temperature and turbidity up to a depth of 50 meters.
Read More
